China rubber machine,rubber mixing equipment,kneader,Star Profit Ltd.

PRODUCTS

Introduction

Main features:

1. Kneader machine consists of body welded with high quality steel plates and two pieces of side plates. The chamber, rotors and piston ram are all jacketed structure for the ingoing of steam, oil and water for heating and cooling to suit the various requirement for the process of mixing and plastication.

2. Dispersion Kneader Machine Motor, reducer adopts hardened tooth surface gear, that has low noise and can save 20% electricity or power and has a long service life.
3. The machine PLC control system adopts Mitsubishi/Omron. Electric parts adopt ABB or US Brand, that will ensure good performance.

4.Hydraulic pressure tilting mechanism with the advantage of fast discharging materials and 140 tilt angle.
5. High efficiency, energy saving and saving occupied space.
6. Interlock protection ensure low personal injury.


Main Technical Specifications
ModelX(S)N 
-3x32
X(S)N 
-10x32
X(S)N 
-20x32
X(S)N 
-35x30
X(S)N 
-55x30
X(S)N 
-75x30
X(S)N 
-110x30
X(S)N 
-150x30
X(S)N
-200x30
Total volume of mixing chamber  L 8254575125180250325440
Working volume of mixing chamber  L 31020355575110150200
Main motor power  kw5.515305575110185220280
Rotational speed of rotor (front/rear) r/ min 32/25.832/2532/2730/24.530/24.530/24.530/24.530/24.530/24.5
Tilting angle degree °135140140140140140140140140
Tilting motor power  kw0.551.11.52.22.2445.57.5
Pressure of compressed air  Mpa0.5-0.80.5-0.80.5- 0.80.5-0.80.6- 0.80.6- 0.80.6-0.80.6-0.80.6-0.8
Pressure of cooling water   Mpa 0.2-0.40.2-0.40.2-0.40.3-0.40.3-0.40.3- 0.40.3- 0.40.3-0.40.3-0.4
Heating steam pressure (plastics mixing) Mpa 0.5-0.80.5- 0.80.5- 0.80.5-0.80.5— 0.80.5- 0.80.5- 0.80.5-0.80.5-0.8
Overall dimensions  mm1660x 960
×1750
2580 x 1300
×2280
2630 x 1520
×2550
3200 x 1900
×2950
3280x 1930
×3070
3330x2620
×3340
3930x3000
×3660
4200x3300
×3900
4520x3400 X4215
Approx. Weight  t~2~3.3~4~6.3~7.5~10.3~14.2~19.5~22.5




Send Message

* Must Be Filled